p2p.wrox.com Forums

p2p.wrox.com Forums (http://p2p.wrox.com/index.php)
-   Biztalk (http://p2p.wrox.com/forumdisplay.php?f=112)
-   -   Multiple receive ports in an orchestration (http://p2p.wrox.com/showthread.php?t=48054)

cmiller66 September 19th, 2006 09:50 PM

Multiple receive ports in an orchestration
 
I am having an issue with an orchestration that I am creating that has the following parameters.

I receive a message (XML) on a Request/Response port. The message is then sent to a send port that passes the message to the MSMQT. The MSMQT passes the message to an application. After the app does its processing, it passes a Response XML file back to a different MSMQ queue (part of the architecture unfortunately). A receive port listening in on the second MSMQT takes the message, passes the message to the Response part of the port operation.

I set the first receive message initializes the BTS.MessageID as the correlation set property. The remaining messages use that correlation set. The issue is that when I build the solution, I get the following error:

"in a sequential convoy the ports must be identical."

I researched this issue and found that this issue occurs when you do not share a receive port.

I was wondering if anyone has encountered this problem and found a way around it. I have to stay with the 2 receive port system. Would separating the orchestration into two work? I should be able to use the BTS.MEssageID property in that second orchestration.

Any help would be greatly appreciated on this issue.


jposey November 17th, 2006 05:22 PM

I have encountered a similar problem. Have you found any resolution?


bruno_spinelli April 15th, 2007 08:16 PM

It's just happening because you are initializing and following a correlation both in a receive shape. Try to initialize the correlation in a send shape and then follow the correlation using a receive shape.

I Hope it helps !

Bruno Spinelli.

harishusharma October 25th, 2008 04:16 AM

Hello Bruno,
I am also having the same issue. The requirement is such, that i have to use one receive port scheduled message in order to activate the orchestration & two another receive port for same message type.

As you said, try to initialize the correlation in a send shape and then follow the correlation using a receive shape.
My question is:which send shape & which receive shape you are talking about?

Please reply... thanks alot in advance
Regards,
harry

Happy Programming,
harry

oliviajones August 14th, 2013 06:56 AM

Add more orchestration
 
In BizTalk server try to add one more orchestration that will pick the xml file and transform it to a text file for another position and keep your solution simple and loosely coupled, You can modify any component without splitting or ending the whole message flow.

http://www.athenainfotech.co.uk/free...k-health-check


All times are GMT -4. The time now is 09:13 AM.

Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
© 2013 John Wiley & Sons, Inc.