The first lin re page language is undelined and gives error child nodes not allowed line 118 web.config

Just starting but can't get started

any thoughts

<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" %>

This line is underlined and give the error Child nodes not allowed line 118 webconfig

However it does not happen on my laptop which makes me think it has to do with the VS 2008 on my desktop vs the VS 2008 on my laptop.

Any help would be appreciated

Hi there,

The error message refers to the web.config file in your site. Apparently, it has an error. Can you post the code for that file?

Imar


---------------------------------------
Imar Spaanjaars
http://Imar.Spaanjaars.Com
Everyone is unique, except for me.
Author of Beginning ASP.NET 3.5 : in C# and VB, ASP.NET 2.0 Instant Results and Dreamweaver MX 2004
Want to be my colleague? Then check out this post.

Code is below. It show the error on the initial creation of the webpage before I do anything.

<?xml version="1.0"?>
<!--
    Note: As an alternative to hand editing this file you can use the
    web admin tool to configure settings for your application. Use
    the Website->Asp.Net Configuration option in Visual Studio.
    A full list of settings and comments can be found in
    machine.config.comments usually located in
    \Windows\Microsoft.Net\Framework\v2.x\Config
-->
<configuration>


    <configSections>
      <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensions SectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
        <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGro up, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
          <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptReso urceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
          <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebService sSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
            <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerial izationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" />
            <section name="profileService" type="System.Web.Configuration.ScriptingProfileSer viceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" />
            <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthentica tionServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" />
            <section name="roleService" type="System.Web.Configuration.ScriptingRoleServic eSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" />
          </sectionGroup>
        </sectionGroup>
      </sectionGroup>
    </configSections>


    <appSettings/>
    <connectionStrings/>
    <system.web>
        <!--
            Set compilation debug="true" to insert debugging
            symbols into the compiled page. Because this
            affects performance, set this value to true only
            during development.

            Visual Basic options:
            Set strict="true" to disallow all data type conversions
            where data loss can occur.
            Set explicit="true" to force declaration of all variables.
        -->
        <compilation debug="false" strict="false" explicit="true">

        <assemblies>
            <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
            <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
            <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
            <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
        </assemblies>

        </compilation>
        <pages>
          <namespaces>
            <clear />
            <add namespace="System" />
            <add namespace="System.Collections" />
            <add namespace="System.Collections.Generic" />
            <add namespace="System.Collections.Specialized" />
            <add namespace="System.Configuration" />
            <add namespace="System.Text" />
            <add namespace="System.Text.RegularExpressions" />
            <add namespace="System.Linq" />
            <add namespace="System.Xml.Linq" />
            <add namespace="System.Web" />
            <add namespace="System.Web.Caching" />
            <add namespace="System.Web.SessionState" />
            <add namespace="System.Web.Security" />
            <add namespace="System.Web.Profile" />
            <add namespace="System.Web.UI" />
            <add namespace="System.Web.UI.WebControls" />
            <add namespace="System.Web.UI.WebControls.WebParts" />
            <add namespace="System.Web.UI.HtmlControls" />
          </namespaces>

          <controls>
            <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
            <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
          </controls>

        </pages>
        <!--
            The <authentication> section enables configuration
            of the security authentication mode used by
            ASP.NET to identify an incoming user.
        -->
        <authentication mode="Windows" />
        <!--
            The <customErrors> section enables configuration
            of what to do if/when an unhandled error occurs
            during the execution of a request. Specifically,
            it enables developers to configure html error pages
            to be displayed in place of a error stack trace.

        <customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
            <error statusCode="403" redirect="NoAccess.htm" />
            <error statusCode="404" redirect="FileNotFound.htm" />
        </customErrors>
        -->


      <httpHandlers>
        <remove verb="*" path="*.asmx"/>
        <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFact ory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
        <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFact ory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
        <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/>
      </httpHandlers>
      <httpModules>
        <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
      </httpModules>


    </system.web>

    <system.codedom>
      <compilers>
        <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4"
                  type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
          <providerOption name="CompilerVersion" value="v3.5"/>
          <providerOption name="WarnAsError" value="false"/>
        </compiler>
        <compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" warningLevel="4"
                  type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
          <providerOption name="CompilerVersion" value="v3.5"/>
          <providerOption name="OptionInfer" value="true"/>
          <providerOption name="WarnAsError" value="false"/>
        </compiler>
      </compilers>
    </system.codedom>

    <!--
        The system.webServer section is required for running ASP.NET AJAX under Internet
        Information Services 7.0. It is not necessary for previous version of IIS.
    -->
    <system.webServer>
      <validation validateIntegratedModeConfiguration="false"/>
      <modules>
        <remove name="ScriptModule" />
        <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
      </modules>
      <handlers>
        <remove name="WebServiceHandlerFactory-Integrated"/>
        <remove name="ScriptHandlerFactory" />
        <remove name="ScriptHandlerFactoryAppServices" />
        <remove name="ScriptResource" />
        <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode"
             type="System.Web.Script.Services.ScriptHandlerFact ory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
        <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode"
             type="System.Web.Script.Services.ScriptHandlerFact ory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
        <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
      </handlers>
    </system.webServer>


    <runtime>
      <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
        <dependentAssembly>
          <assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/>
          <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/>
        </dependentAssembly>
        <dependentAssembly>
          <assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/>
          <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/>
        </dependentAssembly>
      </assemblyBinding>
    </runtime>

</configuration>

Yeah, that looks fine to me. (That is, it runs OK in a test web site in VS 2008)

What version of VS are you using on your desktop? What happens if you choose File | New Web Site and then hit Ctrl+F5? Do you then get a blank web page in your browser or do you get the same error?

Imar


---------------------------------------
Imar Spaanjaars
http://Imar.Spaanjaars.Com
Everyone is unique, except for me.
Author of Beginning ASP.NET 3.5 : in C# and VB, ASP.NET 2.0 Instant Results and Dreamweaver MX 2004
Want to be my colleague? Then check out this post.

Microsoft Visual Studio 2008
Version 9.0.21022.8 RTM
Microsoft .NET Framework
Version 3.5

This is the same version on the laptop.

I used File-New Website and the same underlined error occurred. When I hit Ctrl F5 it opened the "Open File" dialog. I did it several times. The laptop of course opended the website as expected.

This just seems to be real strange behavior of VS 2008. Both OS are Vista. ANy ideas of direction would be helpful.

By the way, I had read through a good part of your book before trying the "Try it Out". It is a great book. You explain things very well and the book flows well with explanations immediately or you mention they are coming - so the reader does not wonder. I am enjoying it very much. Thanks for any help.

Hmmm, it doesn't sounds as if things are working as you'd expect. Maybe reinstalling (repairing) the VS installation would do the trick?

Or you could try to restore VS to its installation settings by running

devenv /setup

from the command line.

Hope this helps, and glad to hear you're enjoying the book so much. Have fun with it!

Imar


---------------------------------------
Imar Spaanjaars
http://Imar.Spaanjaars.Com
Everyone is unique, except for me.
Author of Beginning ASP.NET 3.5 : in C# and VB, ASP.NET 2.0 Instant Results and Dreamweaver MX 2004
Want to be my colleague? Then check out this post.