Wrox Programmer Forums
Go Back   Wrox Programmer Forums > ASP.NET and ASP > ASP.NET 3.5 > ASP.NET 3.5 Basics
|
ASP.NET 3.5 Basics If you are new to ASP or ASP.NET programming with version 3.5, this is the forum to begin asking questions. Please also see the Visual Web Developer 2008 forum.
Welcome to the p2p.wrox.com Forums.

You are currently viewing the ASP.NET 3.5 Basics section of the Wrox Programmer to Programmer discussions. This is a community of software programmers and website developers including Wrox book authors and readers. New member registration was closed in 2019. New posts were shut off and the site was archived into this static format as of October 1, 2020. If you require technical support for a Wrox book please contact http://hub.wiley.com
 
Old September 9th, 2008, 11:40 PM
Authorized User
 
Join Date: Jun 2006
Posts: 47
Thanks: 0
Thanked 2 Times in 2 Posts
Default unable to connect to asp.net development server

hello frnds,
I am facing a problem in my local pc.
I am working on .net 2008 but it is not debugging the website and wenever i run the project it gives error like "unable to connect to asp.net development server"

I tried by reinstalling it again. Problem is getting solved for 2 days but again same problem
I have tried almost all the solutions pl help.
Without debugging i cant work.

Komila Kalia
Software Developer
Reliance engineering Associates (P) Ltd.
__________________
Komila Kalia
Software Developer
Reliance engineering Associates (P) Ltd.
The Following User Says Thank You to Komila For This Useful Post:
 
Old October 13th, 2008, 11:28 PM
Registered User
 
Join Date: Oct 2008
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

did u able to figure out the issue behind this?


Quote:
quote:Originally posted by Komila
 hello frnds,
I am facing a problem in my local pc.
I am working on .net 2008 but it is not debugging the website and wenever i run the project it gives error like "unable to connect to asp.net development server"

I tried by reinstalling it again. Problem is getting solved for 2 days but again same problem
I have tried almost all the solutions pl help.
Without debugging i cant work.

Komila Kalia
Software Developer
Reliance engineering Associates (P) Ltd.
 
Old October 25th, 2008, 03:01 AM
Registered User
 
Join Date: Oct 2008
Posts: 1
Thanks: 0
Thanked 1 Time in 1 Post
Send a message via MSN to shekhani
Default

Step 1: Select the “Tools->External Tools” menu option in VS or Visual Web Developer. This will allow you to configure and add new menu items to your Tools menu.


Step 2: Click the “Add” button to add a new external tool menu item. Name it “WebServer on Port 8010” (or anything else you want).


Step 3: For the “Command” textbox setting enter this value: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\WebD ev.WebServer.EXE (note: this points to the web-server that VS usually automatically runs).


Step 4: For the “Arguments” textbox setting enter this value: /port:8010 /path:$(ProjectDir) (or any port you like)


Step 5: Select the “Use Output Window” checkbox (this will prevent the command-shell window from popping up.



Once you hit apply and ok you will now have a new menu item in your “Tools” menu called “WebServer on Port 8010”. You can now select any web project in your solution and then choose this menu option to launch a web-server that has a root site on port 8010 (or whatever other port you want) for the project.


You can then connect to this site in a browser by simply saying http://localhost:8010/. All root based references will work fine.




Step 6: The last step is to configure your web project to automatically reference this web-server when you run or debug a site instead of launching the built-in web-server itself. To-do this, select your web-project in the solution explorer, right click and select “property pages”. Select the “start options” setting on the left, and under server change the radio button value from the default (which is use built-in webserver) to instead be “Use custom server”. Then set the Base URL value to be: http://localhost:8010/



Obviously I don't know if this is the problem you had but definitely it is something similar, essentially the problem should be that the same port used by your Development Server is not available because it is already used by another web server.



The Following User Says Thank You to shekhani For This Useful Post:
 
Old September 8th, 2009, 03:21 PM
Registered User
 
Join Date: Sep 2009
Posts: 3
Thanks: 0
Thanked 3 Times in 2 Posts
Default

The best solution of unable to connect to asp.net development server is to just log on to http://www.amitbpit.blogspot.com in just two steps..thanx n enjoy.
The Following User Says Thank You to Amitbpit For This Useful Post:
 
Old July 15th, 2012, 01:56 PM
Registered User
 
Join Date: Jul 2012
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default i am not getting it by this solution,its showing error that the command is invalid.

Quote:
Originally Posted by shekhani View Post
Step 1: Select the “Tools->External Tools” menu option in VS or Visual Web Developer. This will allow you to configure and add new menu items to your Tools menu.


Step 2: Click the “Add” button to add a new external tool menu item. Name it “WebServer on Port 8010” (or anything else you want).


Step 3: For the “Command” textbox setting enter this value: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\WebD ev.WebServer.EXE (note: this points to the web-server that VS usually automatically runs).


Step 4: For the “Arguments” textbox setting enter this value: /port:8010 /path:$(ProjectDir) (or any port you like)


Step 5: Select the “Use Output Window” checkbox (this will prevent the command-shell window from popping up.



Once you hit apply and ok you will now have a new menu item in your “Tools” menu called “WebServer on Port 8010”. You can now select any web project in your solution and then choose this menu option to launch a web-server that has a root site on port 8010 (or whatever other port you want) for the project.


You can then connect to this site in a browser by simply saying http://localhost:8010/. All root based references will work fine.




Step 6: The last step is to configure your web project to automatically reference this web-server when you run or debug a site instead of launching the built-in web-server itself. To-do this, select your web-project in the solution explorer, right click and select “property pages”. Select the “start options” setting on the left, and under server change the radio button value from the default (which is use built-in webserver) to instead be “Use custom server”. Then set the Base URL value to be: http://localhost:8010/



Obviously I don't know if this is the problem you had but definitely it is something similar, essentially the problem should be that the same port used by your Development Server is not available because it is already used by another web server.
::::::::::::::::::::::::
i am not getting it by this solution,its showing error that the command is invalid.why this is so???
 
Old April 15th, 2013, 11:48 PM
Registered User
 
Join Date: Feb 2013
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

that is really good informative piece of writing..





Similar Threads
Thread Thread Starter Forum Replies Last Post
unable to connect to asp.net development server Komila ASP.NET 3.5 Basics 4 April 15th, 2011 08:57 AM
ASP.NET development server angshujit ASP.NET 2.0 Basics 4 January 18th, 2007 05:07 AM
IIS and ASP.NET Development Server conflict ASPNewbie2 BOOK: Beginning ASP.NET 2.0 BOOK VB ISBN: 978-0-7645-8850-1; C# ISBN: 978-0-470-04258-8 1 December 28th, 2006 08:23 AM
[000] Unable to connect to server 'SERVER\SQL'; SQ ctanchan SQL Server 2000 1 August 15th, 2003 07:18 AM





Powered by vBulletin®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright (c) 2020 John Wiley & Sons, Inc.